(Revised 2006)

SLALOM

Parameter	Who	When	PerfectPass
OPERATING MODE	Driver/Judge	Before Event	Tournament
Crew Weight	Driver/Judge	Before Event	Weight in lbs
SPEED	Skier	Before first pass	Speed in KPH
Skier Weight	Driver/Judge	Before each skier No adjustment between passes	Weight in lbs
KX	Skier - Should be set to Normal unless the skier asks for other setting	Before each skier and ONLY ONE additional adjustment between passes	KX NORMAL = default KX+ & KX++ = firmer
PX	Skier = should be set to zero (switch off) unless skier asks for other setting	Before each skier No adjustment between passes	PX = 0 to 40 Zero eliminates the switch
SSB	Driver	Adjust as necessary for conditions	initial setting for each boat from chart - adjust as necessary
RPM ADJUST	Driver	Adjust as necessary for conditions	Adjust for conditions in increments of 5 RPM

JUMP

Parameter	Who	When	PerfectPass
CREW WEIGHT	Driver/Judge	Before event	Weight in lbs
SPEED	Skier	Before each pass	Speed in Kph
JUMP LETTER	Driver/Judge - initial setting based on speed, weight, reated distance and input from skier	Before each jump	Select NEW JUMPER and input speed, skier weight and rated distance. Skier may adjust initial setting +/- 3 letters. Adjust as necessary
SKIER WEIGHT	Driver/Judge	Before each skier No adjustment between jumps	Weight in lbs
JUMP DISTANCE	Driver/Judge - with skier input on initial letter setting	Before each skier Driver may adjust best jump letter as necessary between jumps (notify skier of change) to obtain actual times	Distance in feet (system selects initial letter) - Skier may adjust initial setting +/- 3 letters
RPM ADJUST	Driver	As needed	Adjust for conditions in increments of 10 RPM
S2% AND S2 FINE	Driver	Before each skier based on type of second segment pull requested Numbers are suggested starting point only and are boat dependent May have to start or make adjustments outside of suggested values Driver may adjust as necessary to obtain actual times in second segment	S2% (Suggested starting point): Faster second segment = Faster 40 to Faster 60 Return to Baseline = Zero (Option 2) S2FINE - Fine RPM adjust for second segment - normally only used when option 2 has been selected
CT	Driver	Before event May be adjusted as necessary to control speed during counter cut w/head or tail wind	Recommended: Normal 190 Head wind 210 Tail wind 170 3/4 Cut 160
X8u	Skier		X8U (UP) controls the rate of additional rpm added once the jump switch closes. The higher the number, the lower the rate rpm is added. With the higher number, it will take longer for the full additional rpm to be reached (softer at the staart/strongernear the ramp).
X8d	Driver		X8d (DOWN) controls the timing of the rpm drop in the second segment. The higher the number, the longer it will take for the boat to begin controlling speed.

TRICKS

Parameter	Who	When	PerfectPass
SPEED	Driver	Before each pass	Speed in Mph
Kd	Skier - Should be set to normal unless skier asks for other setting	Before each skier	Normal = 16

ADDITIONAL SETTINGS

Previous ABT – Highlight Menu Arrow, & press UP Key.
Press Down Key when slalom is highlighted to address background settings. Use Menu Key to highlight desired setting.

SYSTEM SETTINGS - SSB, RPM OFFSET, PREVIOUS ABT, WT
Highlight Menu Arrow, & press UP Key.
Press Down Key when slalom is highlighted to address background settings. Use Menu Key to highlight desired setting.

Other Features sub menu - Contrast, System Info, Device Test, Ctrl setting, CS/CR. Press Menu & UP Keys together.

System Reset – Press and hold On/off and Menu while powering on system.

Changing MPH/KPH – Press and hold Menu and Down keys while powering on system.

Metric Conversion Feature – Press menu and Down keys for Metric converter to calculate required equivalent values:

            kg = lb, m = ft, or kph = mph

Boat/Motor selection - Press and hold On/off and Menu while powering on system.